 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Optoway TRSL-7380W 3.3V / 1550 nm / 1.25 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER FEATURES l l l l l l l TRSL-7380W ******************************************************************************************************************************************************************************* ****************************************************************************************************************************************************************************** DESCRIPTION Duplex LC Single Mode Transceiver Compliant with IEEE 802.3z 1000BASE-ZX Compliant with Fiber Channel 1X SM-LC-L FC-PI Small Form Factor, RJ-45 size, 2X10 pin Package 1550 nm DFB LD Transmitter 24 dB Power Budget at Least Analog Monitor Function -- Transmitter Laser Bias Current -- Transmitter Laser Optical Power Monitor -- Receiver Photo Detector Current l AC/AC Coupled Signal Input / Output l LVTTL Transmitter Disable Input l LVTTL Signal Detection Output l Single +3.3 V Power Supply l 0 to 70oC Operation l Wave Solderable and Aqueous Washable l Class 1 Laser International Safety Standard IEC-60825 Compliant The TRSL-7380W series single mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as IEEE 802.3z Gigabit Ethernet 1000BASE-LX and Fiber Channel 1X SM-LC-L FC-PI. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. A guaranteed minimum optical link budget of 24 dB is offered which can correspond to a link distance of over 80 km (assuming worst case fiber loss of 0.25 dB/km). The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs photodetector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A LVPECL logic interface simplifies interface to external circuitry. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l Gigabit Ethernet Switches and Routers l Fiber Channel Switch Infrastructure ORDER INFORMATION P/No. TRSL-7380W Bit Rate (Gb/s) 1.25/1.063 1000 BASE ZX Distance (km) 80 Wavelengt Package h (nm) 1550 DFB 2X10 LC Temp. (oC) 0 to 70 TX Power RX Sens. (dBm) (dBm) 5 to 0 -24 Signal Detection LVTTL Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Soldering Temperature Power Supply Voltage Input Voltage Output Current Symbol Tstg Topr --Vcc --Iout Min -40 0 0 GND 0 Max 85 70 260 4.5 Vcc 30 Units o C o C o C V V mA Notes Air flow 1m/sec 10 seconds on leads only Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Data Rate Power Supply Current Symbol Vcc Topr Icc Min 3.135 0 1000 Typ 3.3 1250 200 Max 3.465 70 300 Units / Notes V o C / air flow 1m/sec Mb/s mA ******************************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 V1.1 Optoway Transmitter Specifications (0 oC < Topr < 70 oC, 3.135V < Vcc < 3. 465V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Side Mode Suppression Ratio Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Data Input Current - Low Data Input Current - High Differential Input Voltage Data Input Voltage - Low Data Input Voltage -- High Disable Input Voltage -- Low Disable Input Voltage -- High Shut Off Time for TxDis Symbol Min Typ ------Max 5 1580 1 --0.26 0.26 -120 0.227 Units dBm nm nm dB dB ns ns dB/Hz ns A A mV V V V V ms Po 0 1520 -- SMSR 30 ER 9 Compliant with IEEE 802.3z tr tf RIN TJ IIL IIH VIH - V IL VIL - V CC VIH - V CC VTDIS,L VTDIS,H tDIS -350 350 300 -2.0 -1.1 0 Vcc - 1.3 -1.58 -0.74 0.5 Vcc 1 TRSL-7380W Notes 1 -20 dB Width ******************************************************************************************************************************************************************************* 20% to 80% Values 20% to 80% Values 2 3 3 TX Output Enabled TX Ouput Disabled Notes: 1. Output power is power coupled into a 9/125 m single mode fiber. 2. Measured with a 27-1 PRBS. 3. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.135V < Vcc < 3.465V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Data Output Voltage - Low Data Output Voltage - High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol --Pin Pa Pd Min ---3 ---36 1.0 1100 -2.0 -1.1 2.0 Typ ----------Max -24 ---24 --1600 -1.58 -0.74 0.8 Units dBm dBm dBm dBm dB nm V V V V Notes 1 Transition: low to high Transition: high to low VOL - VCC VOH - VCC VOL VOH 2 2 Notes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS. 2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL inputs. ******************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 6/30/2004 V1.1 Optoway ANALOG DIAGNOSTICS FUNCTIONS Parameter Transmitter Laser Bias Current Monitor Monitor Photodiode Current Monitor Receiver Received Photocurrent Photodiode Responsivity Applied Voltage at VpdR pin Symbol Bmon+, BmonPmon+,PmonRpd R Vpd Min 0 0 0 0.5 2.4 Typ Max Vcc Vcc 1 1.0 Vcc Units V V mA A/W V TRSL-7380W Notes 1 2 3 3 ******************************************************************************************************************************************************************************* 0.9 Notes: 1. PIN 17 and 18 provide an analog voltage output proportional to the laser bias current, based on the following formula: Ibias = V (Bmon+ - Bmon-) / 10 . See below the equivalent circuit. 2. PIN 19 and 20 provide an analog voltage output proportional to the monitor photodiode current, based on the following formula: Imon = V (Pmon+ - Pon-) / 200. See below the equivalent circuit. 3. PIN 1 is used to monitor the received photocurrent. It must be connected to a positive voltage within the specified above. The received power is given by the photocurrent multiplied by the photodiode responsivity. VCC VCC LD Monitor PD Vpdr BM+ I bias 3K 10ohm 3K I mon 3K 200ohm Pmon+ RX PD I pd Pmon- BM- 3K bias circuit control circuit T Analog Monitoring Function Connections ******************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 6/30/2004 V1.1 Optoway CONNECTION DIAGRAM TRSL-7380W ******************************************************************************************************************************************************************************* PIN Symbol Notes PIN Symbol Notes 1 VpdR Receiver power monitor. This pin must be 11 connected to a positive power supply (Vcc), preferably via a small resistor. Supplier photocurrent and maybe used to monitor receiver power. Receiver ground. 12 Receiver ground. 13 No connected No connected Receiver ground. +3.3V dc receiver power supply Signal detect. Logic 1 indicate a normal operation. Receiver Dataout Bar Receiver Dataout VccT +3.3V dc transmitter power supply 2 3 4 5 6 7 8 9 10 MS VeeR VeeR NC NC VeeR VccR SD RD- RD+ MS VeeT Transmitter ground. T Dis Transmitter Disable. Connect this pin to logic "1" TD + TD - VeeT Bmon- Bmon+ PmonPmon+ to disable module. To enable module connect to logic low "0" Transmitter Data In Transmitter Data In Bar Transmitter ground. Laser Bias Monitoring - Negative End Laser Bias Monitoring - Positive End (Bmon+ - Bmon-) = 10 X laser bias current Laser Power Monitoring -- Negative end Laser Power Monitoring -- Positive end (Pmon+ - Pmon-) = 200 X monitor photdiode current 14 15 16 17 18 19 20 Mounting Studs. Connect to Chassis Ground RECOMMENDED CIRCUIT SCHEMATIC Vcc3.3V MICROSTRIP5 Tdis(LVTTL) BmonBmon+ PmonPmon+ 1uH 20 19 18 17 16 15 14 13 12 11 C2 100nF L1 1uH L2 TDLVPECL TD+ Z=50R MICROSTRIP6 Z=5OR VCC3.3V TX RX VpdR VeeRX VeeRX NC NC VeeRX VccRX SD RDRD+ Pmon+ PmonBmon+ BmonVeeTX TDTD+ Tdis VeeTX VccTX C3 100nF C4 10uF PHY DEVICE C1 1 2 3 4 5 6 7 8 9 10 100nF C8 10uF RD+ Vcc3.3V R14 200R VCCRX(3.3V) 10nF Z=50R MICROSTRIP8 Z=5OR SD MICROSTRIP7 100R LVPECL RD- 3K Vpdr TO LVTTL STAGE Note: 1. TX input is terminated inside the module. 2. Veer and Veet are not internally connected to each other. 3. 50 line pattern and component placements on TD+/TD- and RD+/RD- lines shall be symmetrical for better impedance matching. ******************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 6/30/2004 V1.1 Optoway PACKAGE DIAGRAM Units in mm TRSL-7380W ******************************************************************************************************************************************************************************* 1) Standard Case TRSL-7380W 2) Extended Case TRSL-7380WE Note: Specifications subject to change without notice. ******************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 E-mail: sales@optoway.com.tw Fax: 886-3-5979737 http: // www.optoway.com.tw 6/30/2004 V1.1 |
Price & Availability of TRSL-7380W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |